AC-210

Description

The POPE Professional® AC series, AC-210 is a two-way powered Line Array utilizes POPE Professional® 10” transducer and the 1.4” throat compression driver with new technology Directivity Correction Horn (DCH) ensures the constant directivity in the high frequency range. The Waveguide Physical Driver (WPD) increases the output, sensitivity and also improves the directivity of the low frequency range. 

The high and  low frequency neodymium magnet drivers are integrates higher efficiency and power handling with reduced weight and dimension. The newly designed bass reflex enclosure has internal symmetrical heat-dispersion tubes to prevent the system from overheating. The POPE Professional's innovated rigging hardware can fly 16 cabinets array with 1:9 safety standards.

 

 

Applications

•    Touring sound
•    Small and medium-scale Live Sound
•    Arenas, live theaters, concert venues, corporate AV, Places of worship
•    Delay systems for large scale outdoor sound reinforcement

 

Features

•    High efficiency and light weight Neodymium Drivers
•    90° x 10° (H x V) Coverage
•    1:9 safety standard rigging hardware
•    2*10" LF and 1.4” throat Compression driver
•    Class-D amplification
•    32 bit / 96kHz DSP Processing
•    USB Connectivity
•    Built-in DSP

 

Specifications

Line Array Elements

Model AC-210
Class Two way Powered Line Array Speaker
Frequency Response 80Hz - 20kHz
Horizontal Coverage Angle 90°
Vertical Coverage Angle 10°
Flying Kit Heat treated aluminum, front and rear fittings, from 0° to 10° Angle adjustable slots
SPL** 127dB Continuous, 135dB peak
Electronics Sections
Amplifier  
Model VT-11
Total Power 6600W Peak, 3300W RMS Continuous
High Frequency 1600W Peak, 800W RMS Continuous
Low Frequency 5000W Peak, 2500W RMS Continuous
Cooling Aluminum heat Sink with Fan
Power Connector In / Out with Rubber sealing cover
Power AC 85-265V @ 50-60Hz
Processor  
In/Out 1 In / 2 Out
DSP 32 bit / 96kHz DSP
Signal Balanced or Unbalanced input / Balanced output
Connectors XLR female Combo and XLR male
Control USB
Preset 4
Transducer Sections
High Frequency 1*1.4" throat POPE Professional® Compression driver
Voice Coil Diameter 75 mm (3”)
Magnet Material Neodymium
Throat Diameter 35.56 mm (1.4”)
Diaphragm Material Titanium
Low Frequency 2*10" (250 mm) Diameter POPE Professional® Transducer
Voice Coil Diameter 79.04 mm (3”)
Magnet Material Neodymium
Enclosure
Box Construction 15 mm, 9-ply birch Faced plywood 5 degree Trapezoidal enclosure
Finish SoundFlex® environmental friendly coating
Suspension System Integral hinge bars and quick release pins
Grille Powder coated, black, 16-gauge perforated steel grille with charcoal foam backing
Packing Foam with wooden crate carton packing
Dimensions (H x W x D) 325 mm × 800 mm × 414 mm
Net Weight 33 kg
Gross Weight 40 kg