TT-210

Description

The POPE Professional® TT series, TT-210 is a two-way powered Line Array utilizes POPE Professional® 10” transducer and the 1.4” throat compression driver with new technology Directivity Correction Horn (DCH) ensures the constant directivity in the high frequency range. The Waveguide Physical Driver (WPD) increases the output, sensitivity and also improves the directivity of the low frequency range.

The high and of low frequency neodymium magnet drivers are integrates higher efficiency and power handling with reduced weight and dimension. The newly designed bass reflex enclosure has internal symmetrical heat-dispersion tubes to prevent the system from overheating. The POPE Professional's innovated rigging hardware can fly 16 cabinets array with 1:9 safety standards.

The TT Series Line Array is having on board FIR/IIR filters, SoundNet® Networking, AES and Dante®. The customer can add POPE Professional® DE-44 Dante® module at any time to enable Dante® networking. The DE-44 Dante® module is optional.

 

 

Applications

•    Touring sound
•    Small and medium-scale Live Sound
•    Arenas, live theaters, concert venues, corporate AV, Places of worship
•    Delay systems for large scale outdoor sound reinforcement

Features

•    FIR/IIR Filters
•    Dante® / AES / Analog Input
•    40 bit floating point / 96kHz DSP Processing
•    Neodymium Drivers
•    90° x 10° (H x V) Coverage
•    1:9 safety standard rigging hardware
•    2*10" LF and 1.4” throat Compression driver
•    Class-D amplification
•    Supplied with SoundNet® Networking software
•    Ethernet Connectivity
•    24 bit AD/DA converters
•    Built-in DSP

 

Specifications


Line Array Element

Model TT-210
Class Two way Powered Line Array Speaker
Frequency Response 80Hz - 20kHz
Horizontal Coverage Angle 90°
Vertical Coverage Angle 10°
Flying Kit Heat treated aluminum, front and rear fittings, from 0° to 10° Angle adjustable slots
SPL** 125dB Continuous, 133dB peak
Electronics Sections
Amplifier  
Model VT-3
Total Power 6600W Peak, 3300W RMS Continuous
High Frequency 1600W Peak, 800W RMS Continuous
Low Frequency 5000W Peak, 2500W RMS Continuous
Cooling Aluminum heat Sink with Fan
Power Connector In / Out with Rubber sealing cover
Power AC 85-265V @ 50-60Hz
Processor  
In/Out 1 In / 2 Out
DSP 40 bit / 96kHz DSP
Filters FIR / IIR, Frequency, Gain, RMS Limiter
Analog Signal Balanced Input / Output
Digital Signal Dante® / AES  (DE-44 Dante® Module - Optional)
Connectors XLR male / female and Ethernet
Control LAN
Preset 24
For more specifications about DSP Check the XT-4040 product catalogue
Transducer Sections
High Frequency 1*1.4" Throat POPE Professional® Compression driver
Voice Coil Diameter 75 mm (3”)
Magnet Material Neodymium
Throat Diameter 35.56 mm (1.4”)
Diaphragm Material Titanium
Low Frequency 2*10" (250 mm) Diameter POPE Professional® Transducer
Voice Coil Diameter 79.04 mm (3”)
Magnet Material Neodymium
Enclosure
Box Construction 15 mm, 9-ply birch Faced plywood 5 degree Trapezoidal enclosure
Finish SoundFlex® environmental friendly coating
Suspension System Integral hinge bars and quick release pins
Grille Powder coated, black, 16-gauge perforated steel grille with charcoal foam backing
Packing Foam with wooden crate carton packing
Dimensions (H x W x D) 325 mm × 800 mm × 414 mm
Net Weight 34 kg
Gross Weight 40kg