TT-212

Description

The POPE Professional® AC-212 is a three-way powered Line Array speaker system designed for large venues and live concert. The Line Array speaker consist of POPE Professional® dual 12” Neodymium woofer that is circuited parallel, mounted in separate bass reflex enclosure and four high efficiency power handling 6.5” Neodymium high mid range transducers are mounted in a V-shaped configuration combined with two 36 mm exit throat Neodymium compression drivers coupled to individual Waveguides those are vertically aligned. The Line Source Former Horn produces wave front similar to ribbon driver. Advanced transducers are providing high power-to-weight ratio.

The POPE Professional® AC-212 Line Array Speaker utilizes patented Line Source Former Technology Horn, High power maximum SPL 130dB continuous, 138dB peak, Wide bandwidth 80Hz - 20kHz, ±3dB, True 90°(-6dB) horizontal mid and HF pattern control, Fast integral rigging system with variable splay angles from 0°to 10°, 1°step.

The enclosure  constructed with 15 mm birch faced plywood, screwed and glued together for maximum strength and rigidity. The AC-212 systems are designed to be powered by POPE Professional® L-7H Class-D amplification. 

 

Applications

•    Touring sound
•    Small and medium-scale Live Sound
•    Arenas, live theaters, concert venues, corporate AV, Places of worship
•    Delay systems for large scale outdoor sound reinforcement
•    Live sound open-air venues, arenas, concerts, fixed installations, multi-purpose auditoria, sports venues and etc..

 

Features

•    FIR/IIR Filters
•    Dante® / AES / Analog Input
•    40 bit floating point / 96kHz DSP Processing
•    Neodymium Drivers
•    90° x 10° (H x V) Coverage
•    1:9 safety standard rigging hardware
•    2*12" LF, 4*6.5” & 2*1.4” throat Compression driver
•    Class-D amplification
•    Supplied with SoundNet® Networking software
•    Ethernet Connectivity
•    24 bit AD/DA converters
•    Built-in DSP

 

Specifications


Line Array Element

Model AC-212
Class Three way Powered Line Array Speaker
Frequency Response (± 3dB) 80Hz - 20kHz
Horizontal Coverage Angle 90°
Vertical Coverage Angle 10°
Flying Kit Heat treated aluminum, front and rear fittings, from 0° to 10° Angle adjustable slots
SPL** 130dB Continuous, 138dB peak
Electronics Sections
Amplifier  
Model VT-6
Total Power 10000W Peak, 5000W RMS Continuous
High Frequency 2500W Peak, 1250W RMS Continuous
Mid Frequency 2500W Peak, 1250W RMS Continuous
Low Frequency 2500W Peak, 1250W RMS Continuous
Cooling Aluminum heat Sink with two Fans
Power Connector In / Out with Rubber sealing cover
Power AC 85-265V @ 50-60Hz
Processor  
In/Out 1 In / 4 Out
DSP 40 bit / 96kHz DSP
Filters FIR / IIR, Frequency, Gain, RMS Limiter
Analog Signal Balanced Input / Output
Digital Signal Dante® / AES  (DE-44 Dante® Module - Optional)
Connectors XLR male / female and Ethernet
Control LAN
Preset 24
For more specifications about DSP Check the XT-4040 product catalogue
Transducer Sections
High Frequency 2*1.4" throat POPE Professional® Compression driver
Voice Coil Diameter 75 mm (3”)
Magnet Material Neodymium
Diaphragm Material Titanium
Mid Frequency 4*6.5" (165 mm) Diameter POPE Professional® Transducer
Voice Coil Diameter 53.24 mm (2”)
Magnet Materia Neodymium
Low Frequency 2*12" (305 mm) Diameter POPE Professional® Transducer
Voice Coil Diameter 102.01 mm (4”)
Magnet Material Neodymium
Enclosure
Box Construction 15 mm, 9-ply birch Faced plywood 5 degree Trapezoidal enclosure
Finish SoundFlex® environmental friendly coating
Suspension System Integral hinge bars and quick release pins
Grille Powder coated, black, 16-gauge perforated steel grille with charcoal foam backing
Packing Foam with wooden crate carton packing
Dimensions (H x W x D) 380 mm × 1093.5 mm × 530 mm  
Net Weight 66 kg
Gross Weight 77 kg