Description
The POPE Professional® GL-215 is a Four-way Line Array speaker system designed for large venues and live concert. The Line Array speaker consist of two 15” Neodymium woofer that is circuited parallel, mounted in separate bass reflex enclosure and four high efficiency power handling 8” Neodymium high mid range transducers are mounted in a V-shaped configuration combined with four 36 mm exit throat Neodymium compression drivers coupled to individual Waveguides those are vertically aligned. The Line Source Former Horn produces wave front similar to ribbon driver. Advanced European transducers are providing high power-to-weight ratio.
Application
Live sound open-air venues, arenas, concerts, fixed installations, multi-purpose auditoria, sports venues etc.
Features
The POPE Professional® GL-215 Line Array Speaker utilizes patented Line Source Former Technology Horn, High power maximum SPL 132dB continuous, 140dB peak, Wide bandwidth 76Hz - 20kHz, ±3dB, True 90°(-6dB) horizontal mid and HF pattern control, Fast integral rigging system with variable splay angles from 0°to 10°, 1°step.
The enclosure constructed with 3/4” (18 mm) Finnish birch plywood, screwed and glued together for maximum strength and rigidity. The rear panel carries 2 x Neutrik® 8 pin connector. The GL-215 systems are designed to be powered by POPE Professional® power amplifiers. The POPE Professional® XD Series or XP Series digital signal processor is available to provide Crossover, Delay, Equalizer and Limiter functions.
Specifications
Line Array Element
| Model | GL-215 |
| Article No. | #10103 |
| Class | Four way Line Array Speaker |
| Power Rating | 3400 W Continuous* |
| Frequency Response (± 3dB) | 76Hz - 20kHz |
| Frequency Range (-10dB) | 66Hz - 20kHz |
| Horizontal Coverage Angle (-6dB) | 90 deg. nominal (250Hz - 16kHz) |
| Vertical Coverage Angle (-6dB) | Varies with array size and configuration |
| Flying Kit | Heat treated aluminum, front fittings are fixed connection and rear fittings have several angle options for selection from 0° to 10°With 1°adjustable slots |
| SPL** | 132dB Continuous, 140dB peak |
| Recommended Signal Processing | POPE Professional® XD Series or XP Series DSP |
| Transducer Sections | |
| Low Frequency | 2*15" (380 mm) Diameter POPE Professional® Transducer |
| Voice Coil Diameter | 100 mm (4") |
| Voice Coil Material | Copper Clad Aluminum Wire In/Out |
| Magnet Material | Neodymium Slug |
| Chassis Type | Cast Aluminum |
| Cone Surround | Triple roll treated polycotton |
| Former Material | Glass Fibre |
| Input Power Rating / Each Driver |
2*700 Watts Continuous. Pink Noise 2*1400 Watts Program 2*2800 Watts Peak |
| Bandpass Sensitivity | 98 dB SPL (1W @ 1m) |
| Recommended Frequency | 76Hz - 180Hz & 76Hz - 240Hz |
| Bandpass Nominal Impedance | 8Ω |
| Mid Frequency | 4*8" (200 mm) Diameter POPE Professional® Transducer |
| Voice Coil Diameter | 52mm (2") |
| Voice Coil Material | Flat Aluminum Wire / Out |
| Magnet Material | Neodymium Ring |
| Chassis Type | Cast Aluminum |
| Cone Surround | Kevlar Loaded Paper with Cloth Sealed Surround Material |
| Input Power Rating | 4*400 Watts Continuous. Pink Noise 4*800 Watts Program 4*1600 Watts Peak |
| Bandpass Sensitivity | 95dB SPL (1W @ 1m) |
| Recommended Frequency | 240Hz - 1800Hz |
| Bandpass Nominal Impedance |
Series / Parallel : 8Ω |
| High Frequency | 4*3" (75 mm) Compression driver |
| Voice Coil Diameter | 75 mm (3") |
| Magnet Material | Neodymium |
| Throat Diameter | 36 mm (1.4") |
| Diaphragm Material | Titanium |
| Voice coil material | Edgewound flat aluminum |
| Power Rating | 2*100 Watts Continuous. Pink Noise. 2*200 Watts Program 2*400 Watts Peak |
| Bandpass Sensitivity | 109.5 dB SPL (1W @ 1m) |
| Recommended Frequency | 1800Hz - 20kHz |
| Bandpass Nominal Impedance | Series / Parallel : 8Ω Discrete : 8Ω x 4 |
| Enclosure | |
| Box Construction | 18 mm, 13-ply Finnish birch plywood Trapezoidal Wedge frustum 5 degree side angle enclosure, Composite structure, 2 handles |
| Finish | SoundFlex® environment friendly coating |
| Suspension System | Quick release pins with restraining lanyards |
| Grille | Powder coated, black, 16-gauge perforated steel grille with Aluminum mesh |
| Input Connectors | Neutrik® Speakon® NLT8MP (x2) HF:+1-1 / MID:+2-2 / Low1:+3-3 / Low2:+4-4 (Input & Parallel connection) |
| Compatible Sub-woofer | All models of POPE Professional® Sub-woofers |
| Packing | Foam with wooden crate carton packing or Flight case - optional |
| Dimensions (H x W x D) | 424 mm × 1200 mm × 580 mm |
| Weight | 78 kg (171.9 lbs) |